WOW121-Diesel

Decoder
SKU: 1527
Description

The WOW121 is a universal sound decoder for locomotives with DCC-ready 21-pin MTC connectors, and can also be used with any of TCS' motherboards. The WOW121 requires a motherboard to interface with the locomotive. The motherboard will determine the support for the number of lighting functions as well as the type supported (LED or 12V/1.5V bulbs). A WOW121 decoder will support up to 8 lighting functions.

Note: Function 5 and 6 are not programmable, and will only output constant bright lights. Take this into account when wiring multiple lighting functions.

For a complete list of available sounds, check out the "Sounds List" under the "Documents" tab.

  • CD-Quality Sound:

    • TCS' world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate.

  • Back EMF Load Compensation:

    • Provides superior slow speed control and high performance under load.

  • Quiet Drive:

    • Super-quiet motor control for "buzz" free motor performance.

  • Variable Momentum:

    • Allows you to make custom acceleration and deceleration curves.

  • Incandescent Bulb Support:

    • This decoder can be used with 12 Volt bulbs.

  • Function Remapping:

    • Buttons 0 through 12 may be used to control the lighting functions of this decoder.

  • Programmable Lighting Effects:

    • Choose from 20 separate user-programmable lighting effects!

  • Dimmable Brightness:

    • Configure multiple different brightness levels for your LED's or incandescent bulbs.

  • Decoder Lock:

    • Feature which prevents accidental/unwanted programming while activated.

  • Airwire™ Compatible:

    • Fully compatible with Airwire™ operation.

  • Audio Assist®:

    • TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV's!

  • User-Loadable Speed Tables:

    • Configure custom speed curves and set speed limits.

  • Throttle Modes:

    • Choose from multiple throttle modes to meet your operating needs.

  • Proto Notch™:

    • A WOWSound original feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically choose the active notch sound. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.

    Interface Type
    Direct-Plug (21-Pin MTC)
    Dimensions (L x W x H): 1.28" x 0.689" x 0.22" or 32.5mm x 17.5mm x 5.6mm
    Scale: HO Scale
    Continuous/Peak: 1.3/2.0 Amp
    Total Functions: 8
    Function Rating: 100 mA
    12V Outputs
    8

    Speaker Selection

    • This decoder is optimized for 8 Ω speakers (not included).
    • This decoder uses and audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. An 8 Ohm speaker with a 1 Watt minimum power rating is recommended for use with this decoder as it comes out of the package. If you are using an 8 Ohm speaker with a power rating of 2 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
    • The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will require a higher power dissipation rating (more Watts) on said speaker. The minimum power requirement for a 4 Ohm speaker is 4 Watts. If you are using a 4 Ohm speaker with a power rating of 4 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
    • Speaker enclosures greatly increase speaker performance in most cases - improving the apparent volume by more efficiently directing the flow of air and reducing or eliminating destructive interference.

    Decoder Literature

    Download WOW121-Diesel.pdf (578.74 KB)

    Programming Tools


    Comprehensive Guides

    Download Audio Assist Diesel V4.pdf (4.91 MB)
    Download WOWDiesel Sound Manual V4.pdf (1.13 MB)
    Download Comprehensive Programming Guide.pdf (695.09 KB)

    Sounds List

    Diesel V4 Prime Sound List
    Diesel V4 Sound List
    Diesel V3 Sound List
    Diesel V2 Sound List
    Diesel V1 Sound List

    Video Tutorials

    Please view our library of instructional videos at tcsdcc.com/videos for helpful information on using this product.

    Wiring Diagram

    One Year Goof Proof Warranty

    All decoders are covered by a one year goof proof warranty. Please return in a small box.
    You MUST register the failed decoder on our website at tcsdcc.com/warranty
    Follow the instructions on the website before returning any decoders to TCS.